IR-2106

TE-Cooled Extended Area Blackbody

IR-2106: TE-Cooled Extended Area Blackbody

TE-Cooled Extended Area Blackbody

Infrared Systems Development introduces a NEW Low-Cost 6″ x 6″ Thermo-Electrically cooled / Heated blackbody source with a temperature range of 5°C to 150°C. The solid Copper Emitter plate provides superior uniformity and energy emission. Our Proprietary High Emissivity Black Coating provides >0.95 uniform Emissivity from 0.8 to 30 um. A Type “T” Thermocouple is embedded in the emitter plate to allow independent monitoring and calibration of the surface temperature. The IR-2106 offers maximum reliability, stability and uniformity comparable to those of competitive systems, but at less than half the cost, providing the best cost to performance ratio.

Technical Data

Full Specifications

Temperature Range 5°C – 150°C
Emittance (W/cm² / Total W) 0.17 W/cm² (5.4 W)
Wavelength Range 1 – 99 µm
Emissivity 0.96 ± 0.02
Emitter Size 6" × 6" (152.4 × 152.4 mm)
Source Type Extended Area, TE-Cooled
Cooling Method Thermoelectric (TE)
Temperature Resolution 0.1°C
Calibration Accuracy ±0.2°C to NIST Standard
Stability (Short / Long Term) ±0.1°C / ±0.2°C
Response Time <20 minutes (ambient – max)
Temperature Sensors Platinum RTD & Type T
Control Type Active Multi-Band P.I.D.
Line Voltage 90–125 or 208–240 VAC 50–60 Hz
Power Requirements 200 W max
Standard Apertures 6" × 6" (152.4 × 152.4 mm)
Cable Length 8 ft (2.4 m)
Dimensions – Source 8"H × 8"D × 8"W (203 × 203 × 203 mm)
Dimensions – Controller 5.1"H × 13.4"D × 12"W (130 × 340 × 304 mm)
Remote Interface RS-232 or IEEE-488/GPIB
Warranty 1 year
Request a Quote Download Datasheet Back to Extended Area Blackbody Sources